The FANUC A13B-0202-B002 is a PANEL i Basic Unit used as an HMI operator interface in compatible FANUC CNC configurations. It combines an LCD display with the control electronics required to present CNC and machine information to the operator.

This model is commonly identified in organic search results as a FANUC PANEL i, Panel i Basic Unit, operator interface, HMI control panel or CNC display unit. These descriptions refer to its role as an operator-side interface assembly rather than a passive replacement LCD screen alone.

The FANUC PANEL i platform is a PC-based interface designed to work with an applicable CNC control and machine configuration. The functions available on the A13B-0202-B002 depend on the installed CNC, system software, storage device, operator-input hardware and original machine-tool builder configuration.

• 100% function tested before shipment
• Worldwide DHL, UPS and FedEx shipping
• Testing video provided upon request

Product Details

Brand: FANUC
Part Number: A13B-0202-B002
Alternative Format: A13B0202B002
Product Series: A13B-0202
Product Name: FANUC PANEL i Basic Unit
Product Type: HMI / Operator Interface
Display Type: LCD
Primary Role: Displaying CNC and machine information for operator use
Platform: FANUC PANEL i
Application: Compatible FANUC CNC operator-interface configurations
Category: FANUC PANEL i / CNC Display Unit / HMI
Testing: Inspected and function tested under an applicable FANUC configuration
Repair: Repair evaluation available
Core Exchange: Available subject to unit condition and stock

PANEL i Function

The A13B-0202-B002 provides the basic operator-interface hardware for an applicable FANUC PANEL i installation. Depending on the complete system configuration, the PANEL i can present CNC screens, operating information, alarms, programs and other machine data.

This basic unit may be installed with separate MDI or keyboard hardware, storage devices, communication interfaces and other PANEL i components. The exact included functions should therefore be confirmed from the complete assembly rather than inferred from the A13B-0202-B002 number alone.

Basic Unit and LCD Clarification

The A13B-0202-B002 is identified as a PANEL i Basic Unit with an LCD display. It should not be treated as only an LCD panel, touchscreen overlay, MDI keyboard or complete CNC system. Larger PANEL i assemblies may carry additional FANUC numbers for the display assembly, internal boards or attached hardware.

Compatibility Note

Before ordering, verify the full A13B-0202-B002 number, CNC series and model, complete PANEL i assembly number, LCD configuration, touchscreen requirement, connector layout, installed main board, storage device, operating software and attached MDI or keyboard.

Some industry suppliers associate this unit with specific FANUC i-Series controls, but compatibility should not be determined from the control-family name alone. Similar PANEL i units can differ in display configuration, internal hardware, software and machine-tool builder setup.

Common Use Cases

Replacement of a faulty FANUC PANEL i Basic Unit
Restoration of a missing or unstable CNC display
Replacement of damaged operator-interface electronics
Repair of a PANEL i with startup or display problems
Preparation of a tested A13B-0202-B002 spare unit
Maintenance of compatible FANUC CNC operator stations

Sales & Support

Each A13B-0202-B002 is inspected and function tested before delivery. REACO CNC provides product-photo confirmation, testing-video support, repair evaluation, core exchange and compatibility assistance for FANUC PANEL i and CNC display units.

Worldwide delivery is available through DHL, UPS, FedEx and other international express carriers.